Lime Stuff
 
 
 

Goat Hair - 100g bundle

£2.40

inc. VAT

Qty

Why use animal hair in lime plasters?

Animal hair can be added to lime plasters and renders to give the mix extra tensile strength.  It acts as a natural reinforcement and effective bonding key.

  • Goat hair is coarse dark hair for use in the backing coats internally and externally. 
  • Sold in bundles of 100g.*
  • A bundle of approximately 100g will be required for an area of 4sqm of lath or 6sqm of solid wall.
  • As a general rule, use 25g of animal hair per 25kg of lime plaster.

Animal hair for lath and lime plastering

The use of animal hair is particulary important when lime plastering onto laths, as the plaster doesn't adhere well to timber once dried. A lime plaster for laths will require more hair than a plaster which is being applied to solid wall. See our HOW TO LIME PLASTER ONTO LATHS user guide for more information.

Adding the hair to the lime plaster

It is important when adding hair to ensure that it is evenly distributed throughout the mix.  Clumps of hair in a lime plaster will create weak points.

The hair should be added to the plaster just before application as the alkalinity of the lime attacks the protein in the hair causing it to dissolve over a period of time.

There is more information about additives in our ADDITIVES FOR LIME PLASTER user guide.

 

*Bundle sizes vary therefore you may recieve more or fewer bundles than ordered to make the exact weight ordered.

Write a review